Custom Shore Hardness Service

Engineering the Perfect Silicone Hardness

From soft 20A seals to rigid 80A structural parts -- we tune every durometer to match your product's grip, elasticity, and comfort requirements. Food-grade materials, precise tolerance, consistent batches.

Silicone hardness sample strip
20-80A
Shore A Range
±3
Hardness Tolerance
Fundamentals

Understanding Shore Hardness

Shore hardness measures a silicone's resistance to indentation. The Shore A scale (0-100) is the standard for soft elastomers -- the higher the number, the firmer the material.

20A
Ultra Soft
40A
Soft
50A
Medium
70A
Firm
80A
Rigid

Measurement Standard

Measured with a calibrated durometer per ASTM D2240. Readings taken on 6mm-thick samples at 23°C.

Shore A vs Shore 00

Shore A covers typical silicone products; Shore 00 applies to gel-like ultra-soft materials below 20A.

Why It Matters

Hardness directly dictates comfort, seal performance, grip, elasticity, and the useful life of the product.

Tactile Comparison

What Each Hardness Feels Like

A quick reference to help you visualize the touch and flex of each durometer range.

20A

Gummy Bear

Highly deformable, sticks lightly to skin. Ideal for cushioning and soft gaskets.

40A

Pencil Eraser

Soft bend, quick rebound. Comfortable to wear against skin for extended periods.

60A

Rubber Tire

Firm but flexible. Balance of grip, strength, and tactile feedback.

80A

Shoe Heel

Minimal give, high structural stability. Best for load-bearing components.

Mechanical Impact

Elasticity & Support

Softer silicones stretch further and conform better to irregular shapes, while harder grades deliver stronger structural support and shape retention under load.

20-40A

Maximum Stretch

Up to 600% elongation. Ideal for conformable fit and skin contact.

50-60A

Balanced Rebound

Great energy return and shape memory for functional parts.

70-80A

Strong Support

Low compression set -- maintains structural shape under repeated stress.

Elasticity and support testing
Performance Function

Sealing & Anti-Slip Behavior

Hardness drives both watertight sealing and surface grip -- critical factors for swim equipment that stays in place.

Sealing (20-50A)

Softer silicone deforms to fill micro-gaps, creating a leak-proof seal around goggle frames, nose clips, and ear plugs.

  • Low leak rate under water pressure
  • Gentle on skin, no pressure marks

Anti-Slip (50-70A)

Medium-firm grades combined with textured surfaces create high friction without sacrificing comfort -- perfect for swim caps and goggle straps.

  • Secure wet-surface grip
  • Maintains tension over time
Application Guide

Recommended Hardness by Swim Product

Based on 15 years of production data across global swim brands.

Product Recommended Shore A
Swim Caps40-50A
Goggle Seals / Gaskets20-35A
Goggle Straps50-60A
Earplugs / Nose Clips25-40A
Snorkel Mouthpiece35-45A
Hand Paddles / Fins60-75A
Electronic Wristbands50-55A
Hardness sample cards and prototypes
Confirm Before Production

Hardness Sample Cards & Prototypes

Not sure which hardness fits your product? We ship physical hardness sample strips from 20A to 80A, plus functional prototypes of your actual design -- so you can feel and verify before tooling begins.

7 Days
Sample card dispatch
10-15 Days
Prototype confirmation
3 Rounds
Free adjustment included
Signed Spec
Locked production standard
Quality Control

Batch-to-Batch Hardness Consistency

Hardness tolerance of ±3 Shore A across every production run -- guaranteed by in-process testing and documented SOPs.

Raw Material Lot Testing

Every silicone compound batch is durometer-tested before entering the mixer, with results logged against the master spec.

In-Line Shift Checks

QC operators verify hardness every 2 hours during molding, catching drift before it becomes a batch issue.

Full-Batch Report

Each shipment includes a signed hardness inspection report with sample measurements and traceable lot IDs.

Material Engineering

Balancing Performance Properties

Hardness never acts alone. Tuning it affects elongation, tear resistance, and compression set -- our engineers help you optimize the full performance profile.

Tensile Strength

↑ with hardness

Harder grades resist pulling force better.

Elongation

↓ with hardness

Softer silicone stretches further before break.

Tear Resistance

Balanced

Peaks at 50-60A for most swim applications.

Compression Set

↓ with hardness

Harder grades recover shape better after load.

Request Hardness Selection Advice

Share your product concept, usage conditions, and performance goals -- our silicone engineers will recommend the ideal Shore A grade and send physical samples within 7 days.

Phone / WhatsApp
+86 134 1898 3587
Email
edwin@gd-yums.com
Factory
Liaobu, Dongguan, China